Left Continue shopping
Your Order

You have no items in your cart


MDLRCASE Performer Series Pro 6U 104HP Case

Write a review
$1,129.00

We have run out of stock for this item. Please add it to your wishlist, and we will email you when it becomes available

Product is in stock

Specifications:

  • 104HP 6U (208HP module space)
  • Dimensions: L= 60cm W=32cm H=16,3cm
  • Total weight 5,7 kg
  • Space from top rail to bottom 7cm
  • Can be carried while patched
  • Handmade case, fully nailed and glued construction.
  • 12mm birchwood with a special 2 layer protection coating
  • Flush-mounted rails allow the modules to be mounted evenly with the sides of the case
  • Lid allows to carry the case fully patched
  • 4x 104HP rails with M3 threaded inserts
  • Konstantlab Boardpower lightweight PSU. +12V 2A, -12V 1.2A, 5V 1.5A
  • 2 x MDLRCASE Passive busboard, total of 40 headers.
  • Total weight: 5,7 kg (w/ PSU, busboards and rails installed, including lid.)
  • 1 side-mounted power switch + powerinlet
  • 1x 1.8m power cord
  • 1 x Meanwell power adapter included
  • High-quality Penn Elcom components
  • Super-comfortable Luxe carrying handle
  • Anti-slip rubber feet
  • Completely assembled, wired, tested, and ready to play!

 

PSU:

Konstantlab Boardpower

Dimensions: 10 × 4.5 × 2 cm
Weight: 127 g

OUTPUT POWER: 45W

OUTPUTS:
+12V / 2A
-12V / 1.2A
+5V / 1.5A

INPUT
18V (16-20V)

OUTPUT CONNECTORS
2x 16 pin IDC for flat cable
4x WAGO spring terminals

INPUT CONNECTORS
WAGO spring terminals
Panel with 5,5 x 2.1 DC input (center positive) and switch included

PROTECTIONS
Input filter
Input overvoltage
Input reverse polarity voltage protection
Output overvoltage
Output short circuit – automatic recovery
Output over current – automatic recovery
All output protections are independent for each rail

EFFICIENCY
92%

OTHER
Input common-mode LC filter with high efficiency of canceling noise and interference from input connector
Additional input filter on each regulator

 

MDLRCASE busboard:

2x screw terminals for power supply/second busboard connection
20x standard eurorack power connectors with safety notches to protect from modules reversed connections
3 power rails 12V, -12V, 5V
voltage indicator LED on every power line
decoupling capacitors to remove residual PSU ripple at every power line
switchable 5V linear voltage regulator for power supplies that don’t support 5V output

_hp 104