Left Continue shopping
Your Order

You have no items in your cart

Doepfer MCV4 MIDI to CV Converter

Write a review

We have run out of stock for this item. Please add it to your wishlist, and we will email you when it becomes available

Product is in stock

Note: Doesn't come with power supply, but the Make Noise 0-Coast/0-Ctrl Power supply works fine! Looking to split the CV and Gate outputs to maximize control? The Elektron Audio/CV Split Cable Kit is the perfect tool for the job.

MCV4 is a budget-priced MIDI-to-CV-Interface to control vintage monophonic synthesizers via MIDI. MCV4 is provided with 4 analog control voltage outputs (CV1...4) and one Gate/Trigger output.

  • 4 analog control voltages CV1...CV4
  • voltage range for CV1...4: 0...+5V, 8 Bit resolution (equivalent to 1/4 semitone resolution)
  • CV1 for pitch control (normally VCO CV)
  • CV2...4 for voltage control of other functions (e.g. VCF frequency, loudness, modulation)
  • MIDI control of CV1..4:
    • CV1: note on/off with pitch-bend, 1V/octave characteristic
    • CV2 monophic after-touch
    • CV3 velocity and/or volumen (controller #7)
    • CV4 velocity and/or any controller (setting of the controller number via learn button)
  • pitch-bend is used for CV1 generation with 1/4 semitone resolution
  • gate output type can be selected via jumper inside the device between voltage trigger (+5V or power supply voltage) and S-trigger (switched trigger)
  • MIDI channel and reference note for CV1=0V adjustable via learn button
  • different assign modes for CV1 (highest note, last note, reference note)
  • retrigger on/off while playing legato
  • gate/trigger polarity normal/inverted
  • two 1/4" stereo jack sockets for CV1/2 and CV3/4
  • 1/4" mono jack socket for gate/trigger
  • learn button with LED for adjusting MIDI channel, reference note for CV1, controller for CV4
  • MIDI-In, MIDI-Thru
  • non-volatile memory for parameter settings
Please note this unit does not come with a power supply.  The specs required are an AC adapter that supplies 7...15V/100mA DC, DC connector with 5.5 mm outer diameter and 2.1 or 2.5 mm inner diameter, polarity: plus = center, minus = ring